Beverly Hills, California

Inside a $65,000,000 Beverly Hills mansion

Our US counterpart Elevator Boutique installed the home lift in one of the newest estates in Trousdale, Beverly Hills, listed at $65,000,000. The cabin pairs Italian Skinplate walls with a clear glass rear wall, and the doors close flush in the same finish.

The house sits in Trousdale Estates with about 1,670 m² of living space, seven bedrooms and a lower level that holds a 2,000-bottle wine cellar, a wellness centre, a gym and a home theatre. A home with that much to offer below ground needs an easy way down. The lift brings the cellar and the screening room as close as the kitchen, and it does it with the same restraint as the rest of the architecture.

The lift
LocationTrousdale Estates, Beverly Hills, CA
Levels2
Travel4,064 mm
Cabin1151 x 1400 mm
DoorsCentre-opening sliding, Italian Skinplate
FinishesSkinplate side walls and ceiling, clear glass rear wall, LED spots
SafetyIn Cabin Self Rescue, battery backup, light curtain
Installed2019
Listed forUS$65,000,000

Project credits

Architect
cm peck, inc.
Sold for
US$42,000,000
Sold on
22 Jul 2022

The tour reaches the lift at 12:57.

A home where every detail is on show

This house was built to be seen. The tour opens on a $250,000 tree, and the rest of the house keeps that standard: stone, glass and long views over Los Angeles.

A lift in a house like this cannot look like equipment. It has to sit inside the architecture with the same restraint as the joinery around it.

2Levels
4.1 mTravel
350 kgCapacity
2019Installed

Inside the home

Photography: Mark Angeles via CNBC, The Beverly Hills Estates.

The lift

Skinplate and glass, nothing else

The cabin side walls, ceiling and car doors are Italian Skinplate, a fine textured steel with a soft matt finish. The rear wall is clear glass, so light passes through the cabin.

There is no handrail and no clutter. The control panel sits flush and vertical, the phone is flush with black buttons, and the floor was finished by the builder to match the house.

Cabin wallsItalian Skinplate sides, clear glass rear
Landing doorsCentre-opening Skinplate, no glass
CeilingSkinplate with LED spots
SafetyIn Cabin Self Rescue

Safety you never see

The lift carries In Cabin Self Rescue, battery backup and self-levelling at every stop. If the power fails, the cabin lowers itself and the doors open. Nobody waits for a technician.

The shaft was framed in timber by the builder to our engineering drawings, with a shallow 150 mm pit.

Why it works

Finish that matches the house

Skinplate walls, doors and ceiling give the cabin one calm surface.

Light through the cabin

A clear glass rear wall keeps the ride bright.

Rescue built in

In Cabin Self Rescue brings the cabin down safely in a power outage.

This home was completed by our US counterpart Elevator Boutique in California. The same range is built for Australian homes, and you can ride it at our showrooms.

Explore The Range and read how much a home lift costs.

Why Lift Shop

Custom built. Every time.

Lift Shop has installed more than 12,000 home lifts across Australia and, through our US counterpart Elevator Boutique, California. Every one is built in Italy and made to measure for the home it serves, from the cabin size to the last finish.

12,000+ installsAcross Australia and California, in homes like this one.
8-year warrantyStandard on every Lift Shop lift, covering parts.
Made for the homeCabin size, doors, walls and lighting tailored to every floor plan.
Custom Italian finishesFrom brushed bronze to real glass, made for your home.
Black swing door home lift by Lift Shop

See it in person

The only way to judge a lift is to stand in one. Ride The Range at our showrooms in Sydney, Melbourne, Brisbane and Perth.

Download Brochure